Lenord + Bauer

MiniOBSERVER GELMIO10

MiniOBSERVER GELMIO10

MiniCODER

GEL MIO10

Smart Condition Monitoring Sensor for monitoring rotating axes

Highlights

  • RS-485 interface (Modbus RTU) or CAN bus (CANopen)
  • Integrated signal processing with configurable filters
  • Integrated event memory
  • Measuring range: 0 to 16g
  • Frequency range: 0 to 6000 Hz
  • Evaluation criteria according to ISO 20816-3
Show all highlights (20)
  • Flexible installation options
  • Maintenance and wear-free
  • Degree of protection IP68
  • Operating temperature -30 °C to 105 °C
  • High data quality for precise analyses and predictive maintenance
  • Easy setup and parameterization
  • Comprehensive recording of all machine movements
  • Extensive assessment of machine condition
  • Immediate response to critical conditions
  • Easy connection to higher level systems
  • Standard-compliant limit value monitoring
  • Can also be used in extremely harsh environments
  • Reliable operation even in case of extreme temperature fluctuations
  • Easy retrofitting even with limited installation space

Key parameters

Degree of protection
IP68
Target wheel module
0.3 · 0.4 · 0.5
Supply voltage
4.75–5.25 V DC

Technical data

Show all parameters (31)

The data describe technical versions, not order numbers. We will help you choose a specific version.

Versions: GEL MIO10 – Technical Data · GEL MIO10 – Vibration Measurement · GEL MIO10 – Rotational Speed Measurement and Positioning Determination. Shared values are listed once, differing ones for each version.

Approvals

European Economic Area
  • Technical Data: Conformity in accordance with EMC Directive 2014/30/EU

Cable data

Cable diameter
  • Technical Data: 5 mm [0.20 in]
Minimum bending radius
  • Technical Data: 25 mm [0.98 in]
Maximum permissible cable length
  • Technical Data: ≤ 30 m [98.43 ft]
Cable structure (number of cores x ×core cross section)
  • Technical Data: 9 × 0,15 mm2 [25 AWG]

Ambient data

MTTF FIT
  • Technical Data: 4,325,201 h at 55 °C [131 °F]; 231.203×10-9 h-1 at 55 °C [131 °F]
Shock resistance
  • Technical Data: 2000 m/s2 [2187.23 yd/s2], according to EN 60068-2-27
Dielectric strength
  • Technical Data: 500 V AC, as per DIN EN 61439–1
Vibration resistance
  • Technical Data: 200 m/s2 [656.17 ft/s2], in accordance with 60068-2-6
Working temperature range
  • Technical Data: 0 °C to +70 °C [32 °F to 158°F]
Electromagnetic compatibility
  • Technical Data: Electromagnetic emission DIN EN 61000-6-4 DIN EN 61000-6-3; Electromagnetic immunity DIN EN 61000-6-2 DIN EN 61000-6-1
Operating and storage temperature range
  • Technical Data: -30 °C to +105 °C [-22 °F to 221 °F]
Degree of protection with connector installed
  • Technical Data: IP 68

Electrical data

Power-on time
  • Technical Data: < 0.5 s
Digital interface
  • Technical Data: ModbusRTU RS-485
Data transmission rate
  • Technical Data: 115.200 bit/s
Power consumption without load
  • Technical Data: ≤ 0.5 W
Current consumption without load
  • Technical Data: ≤ 80 mA
Supply voltage UB (polarity reversal protected, overvoltage protected)
  • Technical Data: 5 V DC ± 5%

Mechanical data

Weight
  • Technical Data: 30 g [1.06 oz]
Housing material
  • Technical Data: Zinc die casting

Vibration measurement

Axes
  • Vibration Measurement: 3-axis MEMS
Frequency range
  • Vibration Measurement: DC up to 6 kHz (± 3 dB)
Measuring range
  • Vibration Measurement: ± 2g / ± 4g / ± 8g / ± 16g selectable
Sampling frequency
  • Vibration Measurement: 26.7 kHz

Target wheel

Material
  • Rotational Speed Measurement and Positioning Determination: Ferromagnetic steel
Module m
  • Rotational Speed Measurement and Positioning Determination: 0.3; 0.4; 0.5
Reference mark
  • Rotational Speed Measurement and Positioning Determination: Tooth mark
Target wheel width
  • Rotational Speed Measurement and Positioning Determination: 10 mm

Measuring system

Nominal air gap
  • Rotational Speed Measurement and Positioning Determination: Module 0.3: 0.15 mm ± 0.02 mm [5.91 mil ± 0.79 mil]; Module 0.4: 0.20 mm ± 0.03 mm [7.87 mil ± 1.18 mil]; Module 0.5: 0.20 mm ± 0.03 mm [7.87 mil ± 1.18 mil]

Rotational speed measurement and positioning determination

Maximum permissible rotational speed
  • Rotational Speed Measurement and Positioning Determination: ≤ 100,000 min-1
Source of the technical data

Interested in more products?

Build an inquiry from several items.

Add products to the inquiry cart and send our team a single combined inquiry.

Back to the catalogue

Do you have a technical question?

Need to check compatibility, request 3D models or technical documentation? Write to us and our team of engineers will get back to you promptly.

* Required field

From choosing components to a complete technical system