Gimota Konektory
Tyto zásuvky odpovídají normám MIL-DTL-5015 a VG95234. Lze je použít jak pro vnitřní, tak pro venkovní aplikace. V závislosti na použitém krytu lze dosáhnout stupně krytí až IP69K pro připojení. Zásuvky byly testovány pro venkovní použití podle IEC EN 60529 IP65 / IP67 / IP68 (5 bar) a podle DIN 40050 a IP69K. Pro venkovní aplikace je nutné použít kryt s utěsněným kabelovým svěrákem nebo adaptérem pro teplem smrštitelné tvary. Hlavní vlastnosti těchto drážních konektorů jsou: bajonetové spojení, vkládané kontakty až do 105, průřezy od 0,5 do 50 mm², odolnost proti palivům, tukům a izolačním olejům apod., vysoká mechanická zatížitelnost.
| Katalogové číslo | Barva povrchu | Materiál | Otevírací moment [Nm] | Počet kontaktů, velikost 0 | Počet kontaktů, velikost 12 | Počet kontaktů, velikost 16 | Počet kontaktů, velikost 4 | Počet kontaktů, velikost 8H | Počet možností kodování | Povrch | Provozní teplota [°C] | Typ kontaktu | Typ povrchu | Velikost | Vodivost (MΩ) | Zakotvovací moment [Nm] | Izolační skoková vzdálenost [mm] | Napájecí napětí AC [V] | Napájecí napětí DC [V] | Napěťová třída | Napěťový index | Počet kontaktů | Zkušební napětí AC [V] | Nominální proud (trvalý) [A] | Rozměr 8H – jmenovitý proud (trvalý) [A] | Rozměr 8H – maximální proud (dočasný) [A] | Rozměr 8H – zkušební proud [A] | Velikost 0 – maximální proud (krátkodobý) [A] | Velikost 0 – nominální proud (trvalý) [A] | Velikost 0 – zkušební proud [A] | Velikost 0* – maximální proud (krátkodobý) [A] | Velikost 0* – zkušební proud [A] | Velikost 12 – maximální proud (krátkodobý) [A] | Velikost 12 – nominální proud (trvalý) [A] | Velikost 12 – zkušební proud [A] | Velikost 16 – maximální proud (krátkodobý) [A] | Velikost 16 – nominální proud (trvalý) [A] | Velikost 16 – zkušební proud [A] | Velikost 16S – maximální proud (krátkodobý) [A] | Velikost 16S – nominální proud (trvalý) [A] | Velikost 16S – zkušební proud [A] | Velikost 4 – maximální proud (krátkodobý) [A] | Velikost 4 – nominální proud (trvalý) [A] | Velikost 4 – zkušební proud [A] | Materiál kontaktní vložky | L1 [mm] | L2 [mm] | L3 [mm] | N1 | Průměr D1 [mm] | R1 [mm] | S1 [mm] | T1 [mm] | X1 [mm] | Třída ochrany EN 60529 (montovaná) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| GB210-10SL-3PN-EAC | Černá | Hliníková slitina | min. 0.45 | — | — | — | — | — | — | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 10SL | Nevodivá | max. 1.7 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 2.8 | 5/8"-24 UNEF 2A | 18.2 | 18.2 | 25.4 | 3.2 | 9.0 | IP69 | |
| GB210-10SL-3SN-EAC | Černá | Hliníková slitina | min. 0.45 | — | — | — | — | — | — | Epoxid-polyuretan | Provozní teplota | Soket | Lakovaná | 10SL | Nevodivá | max. 1.7 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 2.8 | 5/8"-24 UNEF 2A | 18.2 | 18.2 | 25.4 | 3.2 | 9.0 | IP69 | |
| GB210-10SL-4PN-EAC | Černá | Hliníková slitina | min. 0.45 | — | — | — | — | — | — | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 10SL | Nevodivá | max. 1.7 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 2.8 | 5/8"-24 UNEF 2A | 18.2 | 18.2 | 25.4 | 3.2 | 9.0 | IP69 | |
| GB210-10SL-4SN-EAC | Černá | Hliníková slitina | min. 0.45 | — | — | — | — | — | — | Epoxid-polyuretan | Provozní teplota | Soket | Lakovaná | 10SL | Nevodivá | max. 1.7 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 2.8 | 5/8"-24 UNEF 2A | 18.2 | 18.2 | 25.4 | 3.2 | 9.0 | IP69 | |
| GB210-14S-2PN-EAC | Černá | Hliníková slitina | min. 0.55 | — | — | — | — | — | Možností kódování | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 14S | Nevodivá | max. 1.8 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 3/4"-20 UNEF 2A | 24.6 | 23 | 30.2 | 3.2 | 9.0 | IP69 | |
| GB210-14S-2SN-EAC | Černá | Hliníková slitina | min. 0.55 | — | — | — | — | — | Možností kódování | Epoxid-polyuretan | Provozní teplota | Soket | Lakovaná | 14S | Nevodivá | max. 1.8 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 3/4"-20 UNEF 2A | 24.6 | 23 | 30.2 | 3.2 | 9.0 | IP69 | |
| GB210-14S-5PN-EAC | Černá | Hliníková slitina | min. 0.55 | — | — | — | — | — | Počet variant kódování | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 14S | Nevodivá | max. 1.8 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 3/4"-20 UNEF 2A | 24.6 | 23 | 30.2 | 3.2 | 9.0 | IP69 | |
| GB210-14S-5SN-EAC | Černá | Hliníková slitina | min. 0.55 | — | — | — | — | — | Počet variant kódování | Epoxid-polyuretan | Provozní teplota | Soket | Lakovaná | 14S | Nevodivá | max. 1.8 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 3/4"-20 UNEF 2A | 24.6 | 23 | 30.2 | 3.2 | 9.0 | IP69 | |
| GB210-14S-6PN-EAC | Černá | Hliníková slitina | min. 0.55 | — | — | — | — | — | Počet variant kódování | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 14S | Nevodivá | max. 1.8 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 3/4"-20 UNEF 2A | 24.6 | 23 | 30.2 | 3.2 | 9.0 | IP69 | |
| GB210-14S-6SN-EAC | Černá | Hliníková slitina | min. 0.55 | — | — | — | — | — | Počet variant kódování | Epoxid-polyuretan | Provozní teplota | Soket | Lakovaná | 14S | Nevodivá | max. 1.8 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 3/4"-20 UNEF 2A | 24.6 | 23 | 30.2 | 3.2 | 9.0 | IP69 | |
| GB210-14S-7PN-EAC | Černá | Hliníková slitina | min. 0.55 | — | — | — | — | — | 3 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 14S | Nevodivá | max. 1.8 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 3/4"-20 UNEF 2A | 24.6 | 23 | 30.2 | 3.2 | 9.0 | IP69 | |
| GB210-14S-7SN-EAC | Černá | Hliníková slitina | min. 0.55 | — | — | — | — | — | 3 | Epoxidový polyuretan | -55 - +125 | Zárazník | Lakovaná | 14S | Nevodivá | max. 1.8 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 3/4"-20 UNEF 2A | 24.6 | 23 | 30.2 | 3.2 | 9.0 | IP69 | |
| GB210-14S-9PN-EAC | Černá | Hliníková slitina | min. 0.55 | — | — | — | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 14S | Nevodivá | max. 1.8 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 3/4"-20 UNEF 2A | 24.6 | 23 | 30.2 | 3.2 | 9.0 | IP69 | |
| GB210-14S-9SN-EAC | Černá | Hliníková slitina | min. 0.55 | — | — | — | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Zárazník | Lakovaná | 14S | Nevodivá | max. 1.8 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 3/4"-20 UNEF 2A | 24.6 | 23 | 30.2 | 3.2 | 9.0 | IP69 | |
| GB210-14S-A7PN-EAC | Černá | Hliníková slitina | min. 0.55 | — | — | — | — | — | — | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 14S | Nevodivá | max. 1.8 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 3/4"-20 UNEF 2A | 24.6 | 23 | 30.2 | 3.2 | 9.0 | IP69 | |
| GB210-14S-A7SN-EAC | Černá | Hliníková slitina | min. 0.55 | — | — | — | — | — | — | Epoxidový polyuretan | -55 - +125 | Zárazník | Lakovaná | 14S | Nevodivá | max. 1.8 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 3/4"-20 UNEF 2A | 24.6 | 23 | 30.2 | 3.2 | 9.0 | IP69 | |
| GB210-16-10PN-EAC | Černá | Hliníková slitina | min. 0.63 | — | 3 | — | — | — | 3 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 16 | Nevodivá | max. 2.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.0 | 19.0 | 3.2 | 7/8"-20 UNEF 2A | 27.4 | 24.6 | 32.5 | 3.2 | 9.0 | IP69 | |
| GB210-16-10SN-EAC | Černá | Hliníková slitina | min. 0.63 | — | 3 | — | — | — | 3 | Epoxidový polyuretan | -55 - +125 | Zárazník | Lakovaná | 16 | Nevodivá | max. 2.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.0 | 19.0 | 3.2 | 7/8"-20 UNEF 2A | 27.4 | 24.6 | 32.5 | 3.2 | 9.0 | IP69 | |
| GB210-16-9PN-EAC | Černá | Hliníková slitina | min. 0.63 | — | 2 | 2 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 16 | Nevodivá | max. 2.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 34.0 | 19.0 | 3.2 | 7/8"-20 UNEF 2A | 27.4 | 24.6 | 32.5 | 3.2 | 9.0 | IP69 | |
| GB210-16-9SN-EAC | Černá | Hliníková slitina | min. 0.63 | — | 2 | 2 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Zárazník | Lakovaná | 16 | Nevodivá | max. 2.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 34.0 | 19.0 | 3.2 | 7/8"-20 UNEF 2A | 27.4 | 24.6 | 32.5 | 3.2 | 9.0 | IP69 | |
| GB210-16S-1PN-EAC | Černá | Hliníková slitina | min. 0.63 | — | — | — | — | — | 2 | Epoxidový polyuretan | Provozní teplota | Kolík | Lakovaná | 16S | Nevodivá | max. 2.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 7/8"-20 UNEF 2A | 27.4 | 24.6 | 32.5 | 3.2 | 9.0 | IP69 | |
| GB210-16S-1SN-EAC | Černá | Hliníková slitina | min. 0.63 | — | — | — | — | — | 2 | Epoxidový polyuretan | Provozní teplota | Zárazník | Lakovaná | 16S | Nevodivá | max. 2.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 7/8"-20 UNEF 2A | 27.4 | 24.6 | 32.5 | 3.2 | 9.0 | IP69 | |
| GB210-16S-4PN-EAC | Černá | Hliníková slitina | min. 0.63 | — | — | — | — | — | 4 | Epoxidový polyuretan | Provozní teplota | Kolík | Lakovaná | 16S | Nevodivá | max. 2.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 7/8"-20 UNEF 2A | 27.4 | 24.6 | 32.5 | 3.2 | 9.0 | IP69 | |
| GB210-16S-4SN-EAC | Černá | Hliníková slitina | min. 0.63 | — | — | — | — | — | 4 | Epoxidový polyuretan | Provozní teplota | Zárazník | Lakovaná | 16S | Nevodivá | max. 2.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 7/8"-20 UNEF 2A | 27.4 | 24.6 | 32.5 | 3.2 | 9.0 | IP69 | |
| GB210-16S-5PN-EAC | Černá | Hliníková slitina | min. 0.63 | — | — | — | — | — | 4 | Epoxidový polyuretan | Provozní teplota | Kolík | Lakovaná | 16S | Nevodivá | max. 2.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 7/8"-20 UNEF 2A | 27.4 | 24.6 | 32.5 | 3.2 | 9.0 | IP69 | |
| GB210-16S-5SN-EAC | Černá | Hliníková slitina | min. 0.63 | — | — | — | — | — | 4 | Epoxidový polyuretan | Provozní teplota | Zárazník | Lakovaná | 16S | Nevodivá | max. 2.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 7/8"-20 UNEF 2A | 27.4 | 24.6 | 32.5 | 3.2 | 9.0 | IP69 | |
| GB210-16S-8PN-EAC | Černá | Hliníková slitina | min. 0.63 | — | — | — | — | — | 2 | Epoxidový polyuretan | Provozní teplota | Kolík | Lakovaná | 16S | Nevodivá | max. 2.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 7/8"-20 UNEF 2A | 27.4 | 24.6 | 32.5 | 3.2 | 9.0 | IP69 | |
| GB210-16S-8SN-EAC | Černá | Hliníková slitina | min. 0.63 | — | — | — | — | — | 2 | Epoxidový polyuretan | Provozní teplota | Zárazník | Lakovaná | 16S | Nevodivá | max. 2.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | Ethylen-akrylát GXF | 25.0 | 14.2 | 3.2 | 7/8"-20 UNEF 2A | 27.4 | 24.6 | 32.5 | 3.2 | 9.0 | IP69 | |
| GB210-18-10PN-EAC | Černá | Hliníková slitina | min. 1.0 | — | 4 | — | — | — | 2 | Epoxidový polyuretan | Provozní teplota | Kolík | Lakovaná | 18 | Nevodivá | max. 4.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-10SN-EAC | Černá | Hliníková slitina | min. 1.0 | — | 4 | — | — | — | 2 | Epoxidový polyuretan | Provozní teplota | Zárazník | Lakovaná | 18 | Nevodivá | max. 4.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-11PN-EAC | Černá | Hliníková slitina | min. 1.0 | — | 5 | — | — | — | 2 | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 18 | Nevodivá | max. 4.0 | ≥ 3.2 | 500 | 700 | SEV-EN60998-1 | MIL-DTL-5015 | Všechny | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-11SN-EAC | Černá | Hliníková slitina | min. 1.0 | — | 5 | — | — | — | 2 | Epoxid-polyuretan | Provozní teplota | Zárazka | Lakovaná | 18 | Nevodivá | max. 4.0 | ≥ 3.2 | 500 | 700 | SEV-EN60998-1 | MIL-DTL-5015 | Všechny | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-12PN-EAC | Černá | Hliníková slitina | min. 1.0 | — | — | 6 | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 18 | Nevodivá | max. 4.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-12SN-EAC | Černá | Hliníková slitina | min. 1.0 | — | — | 6 | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 18 | Nevodivá | max. 4.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-19PN-EAC | Černá | Hliníková slitina | min. 1.0 | — | — | 10 | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 18 | Nevodivá | max. 4.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-19SN-EAC | Černá | Hliníková slitina | min. 1.0 | — | — | 10 | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 18 | Nevodivá | max. 4.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-1PN-EAC | Černá | Hliníková slitina | min. 1.0 | — | — | 10 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 18 | Nevodivá | max. 4.0 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-1SN-EAC | Černá | Hliníková slitina | min. 1.0 | — | — | 10 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 18 | Nevodivá | max. 4.0 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-20PN-EAC | Černá | Hliníková slitina | min. 1.0 | — | — | 5 | — | — | 3 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 18 | Nevodivá | max. 4.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-20SN-EAC | Černá | Hliníková slitina | min. 1.0 | — | — | 5 | — | — | 3 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 18 | Nevodivá | max. 4.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-22PN-EAC | Black | Hliník | min. 1.0 | — | — | 3 | — | — | 4 | Epoxy-polyurethane | -55 - +125 | Kolík | Varnished | 18 | Non conductive | max. 4.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylene acrylate GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-22SN-EAC | Black | Hliník | min. 1.0 | — | — | 3 | — | — | 4 | Epoxy-polyurethane | -55 - +125 | Zásuvka | Varnished | 18 | Non conductive | max. 4.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylene acrylate GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-3PN-EAC | Black | Hliník | min. 1.0 | — | 2 | — | — | — | 4 | Epoxy-polyurethane | -55 - +125 | Kolík | Varnished | 18 | Non conductive | max. 4.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylene acrylate GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-3SN-EAC | Black | Hliník | min. 1.0 | — | 2 | — | — | — | 4 | Epoxy-polyurethane | -55 - +125 | Zásuvka | Varnished | 18 | Non conductive | max. 4.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylene acrylate GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-4PN-EAC | Black | Hliník | min. 1.0 | — | — | 4 | — | — | 4 | Epoxy-polyurethane | -55 - +125 | Kolík | Varnished | 18 | Non conductive | max. 4.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylene acrylate GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-4SN-EAC | Black | Hliník | min. 1.0 | — | — | 4 | — | — | 4 | Epoxy-polyurethane | -55 - +125 | Zásuvka | Varnished | 18 | Non conductive | max. 4.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylene acrylate GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-8PN-EAC | Black | Hliník | min. 1.0 | — | 1 | 7 | — | — | 2 | Epoxy-polyurethane | -55 - +125 | Kolík | Varnished | 18 | Non conductive | max. 4.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylene acrylate GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-8SN-EAC | Black | Hliník | min. 1.0 | — | 1 | 7 | — | — | 2 | Epoxy-polyurethane | -55 - +125 | Zásuvka | Varnished | 18 | Non conductive | max. 4.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylene acrylate GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-9PN-EAC | Black | Hliník | min. 1.0 | — | 2 | 5 | — | — | 4 | Epoxy-polyurethane | -55 - +125 | Kolík | Varnished | 18 | Non conductive | max. 4.0 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylene acrylate GXF | 34.3 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-18-9SN-EAC | Black | Hliník | min. 1.0 | — | 2 | 5 | — | — | 4 | Epoxy-polyurethane | -55 - +125 | Zásuvka | Varnished | 18 | Non conductive | max. 4.0 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylene acrylate GXF | 25.0 | 19.0 | 4.0 | 1"-20 UNEF 2A | 31 | 27 | 35 | 3.2 | 9.0 | IP69 | |
| GB210-20-11PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 13 | — | — | — | Epoxiduritanová polyuretanová | -55 - +125 | Kolík | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-11SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 13 | — | — | — | Epoxiduritanová polyuretanová | -55 - +125 | Zárazka | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-15PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | 7 | — | — | — | 2 | Epoxiduritanová polyuretanová | -55 - +125 | Kolík | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-15SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | 7 | — | — | — | 2 | Epoxiduritanová polyuretanová | -55 - +125 | Zárazka | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-18PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | 3 | 6 | — | — | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Kolík | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-18SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | 3 | 6 | — | — | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Zárazka | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-19PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | — | — | 3 | 3 | Epoxiduritanová polyuretanová | -55 - +125 | Kolík | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-19SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | — | — | 3 | 3 | Epoxiduritanová polyuretanová | -55 - +125 | Zárazka | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-24PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 2 | — | 2 | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Kolík | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-24SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 2 | — | 2 | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Zárazka | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-27PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 14 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-27SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 14 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Zástrčka | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-29PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 17 | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-29SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 17 | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Zástrčka | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-33PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 11 | — | — | 1 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-33SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 11 | — | — | 1 | Epoxid-polyuretan | -55 - +125 | Zástrčka | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-3PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | 3 | — | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-3SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | 3 | — | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Zástrčka | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-4PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | 4 | — | — | — | 3 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-4SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | 4 | — | — | — | 3 | Epoxid-polyuretan | -55 - +125 | Zástrčka | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-7PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 8 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-7SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 8 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-A48PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 19 | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-20-A48SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 19 | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 20 | Nevodivá | max. 5.0 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/8"-18 UNEF 2A | 34.2 | 29.4 | 38.1 | 3.2 | 9.0 | IP69 | |
| GB210-22-14PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 19 | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-14SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 19 | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-18PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 8 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-18SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 8 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-19PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 14 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-19SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 14 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Zástrčková | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69K | |
| GB210-22-1PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | — | — | 2 | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-1SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | — | — | 2 | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-21PN-EAC | Černá | Hliníková slitina | min. 1.5 | 1 | — | 2 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | 200 | — | — | — | 300 | 200 | 240 | 300 | 240 | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-21SN-EAC | Černá | Hliníková slitina | min. 1.5 | 1 | — | 2 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | 200 | — | — | — | 245 | 150 | 200 | 300 | 240 | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-22PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | — | — | 4 | 3 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-22SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | — | — | 4 | 3 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-23PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | 8 | — | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-23SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | 8 | — | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-2PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | — | — | 3 | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-2SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | — | — | 3 | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-A10PN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 10 | — | — | 2 | Epoxidový polyuretan | Provozní teplota | Kolík | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-22-A10SN-EAC | Černá | Hliníková slitina | min. 1.5 | — | — | 10 | — | — | 2 | Epoxidový polyuretan | -55 - +125 | Zárazník | Lakovaná | 22 | Nevodivá | max. 6.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 34.3 | 19.0 | 4.0 | 1 1/4"-18 UNEF 2A | 37.4 | 31.8 | 41 | 3.2 | 9.0 | IP69 | |
| GB210-24-07PN-EAC | Černá | Hliníková slitina | min. 2.0 | — | 7 | — | — | — | 2 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 4.8 | 900 | 1250 | SEV-EN60998-1 | MIL-DTL-5015 | Všechny | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-07SN-EAC | Černá | Hliníková slitina | min. 2.0 | — | 7 | — | — | — | 2 | Epoxidový polyuretan | -55 - +125 | Zárazník | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 4.8 | 900 | 1250 | SEV-EN60998-1 | MIL-DTL-5015 | Všechny | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-10PN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | — | — | 7 | 2 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-10SN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | — | — | 7 | 2 | Epoxidový polyuretan | -55 - +125 | Zárazník | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-11PN-EAC | Černá | Hliníková slitina | min. 2.0 | — | 6 | — | — | 3 | 4 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-11SN-EAC | Černá | Hliníková slitina | min. 2.0 | — | 6 | — | — | 3 | 4 | Epoxidový polyuretan | -55 - +125 | Zárazník | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-12PN-EAC | Černá | Hliníková slitina | min. 2.0 | — | 3 | — | 2 | — | 4 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-12SN-EAC | Černá | Hliníková slitina | min. 2.0 | — | 3 | — | 2 | — | 4 | Epoxidový polyuretan | -55 - +125 | Zárazník | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-19PN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | 12 | — | — | — | Epoxidový polyuretan | Provozní teplota | Kolík | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-19SN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | 12 | — | — | — | Epoxidový polyuretan | Provozní teplota | Zárazník | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-20PN-EAC | Černá | Hliníková slitina | min. 2.0 | — | 2 | 9 | — | — | 4 | Epoxidový polyuretan | Provozní teplota | Kolík | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-20SN-EAC | Černá | Hliníková slitina | min. 2.0 | — | 2 | 9 | — | — | 4 | Epoxidový polyuretan | Provozní teplota | Zárazník | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-22PN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | — | — | 4 | 3 | Epoxidový polyuretan | Provozní teplota | Kolík | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-22SN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | — | — | 4 | 3 | Epoxidový polyuretan | Provozní teplota | Zárazník | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-27PN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | 7 | — | — | 2 | Epoxidový polyuretan | Provozní teplota | Kolík | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 6.3 | 1250 | 1750 | MIL-DTL-5015 | — | — | 3500 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-27SN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | 7 | — | — | 2 | Epoxidový polyuretan | Provozní teplota | Zárazník | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 6.3 | 1250 | 1750 | MIL-DTL-5015 | — | — | 3500 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-28PN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | 24 | — | — | 4 | Epoxidový polyuretan | Provozní teplota | Kolík | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-28SN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | 24 | — | — | 4 | Epoxidový polyuretan | Provozní teplota | Zárazník | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-2PN-EAC | Černá | Hliníková slitina | min. 2.0 | — | 7 | — | — | — | 2 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-2SN-EAC | Černá | Hliníková slitina | min. 2.0 | — | 7 | — | — | — | 2 | Epoxidový polyuretan | -55 - +125 | Zárazka | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-5PN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | 16 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-5SN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | 16 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Zárazka | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-9PN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | — | 2 | — | 4 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-9SN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | — | 2 | — | 4 | Epoxidový polyuretan | -55 - +125 | Zárazka | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-A25PN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | 25 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-A25SN-EAC | Černá | Hliníková slitina | min. 2.0 | — | — | 25 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Zárazka | Lakovaná | 24 | Nevodivá | max. 6.5 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 3/8"-18 UNEF 2A | 41 | 35 | 44.5 | 3.7 | 9.0 | IP69 | |
| GB210-24-A28PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | 28 | — | — | 3 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 41 | 35 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-24-A28SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | 28 | — | — | 3 | Epoxidový polyuretan | -55 - +125 | Zárazka | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 1.6 | 200 | 250 | MIL-DTL-5015 | — | — | 1000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 41 | 35 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-10PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 3 | — | 2 | 2 | 4 | Epoxidur-polymer | -55 - +125 | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-10SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 3 | — | 2 | 2 | 4 | Epoxidur-polymer | -55 - +125 | Sleva | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-11PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 4 | 18 | — | — | 4 | Epoxidur-polymer | -55 - +125 | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-11SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 4 | 18 | — | — | 4 | Epoxidur-polymer | -55 - +125 | Sleva | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-12PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | 26 | — | — | 3 | Epoxidur-polymer | -55 - +125 | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-12SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | 26 | — | — | 3 | Epoxidur-polymer | -55 - +125 | Sleva | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-15PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | 35 | — | — | 4 | Epoxidur-polymer | -55 - +125 | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-15SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | 35 | — | — | 4 | Epoxidur-polymer | -55 - +125 | Sleva | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-16PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | 20 | — | — | 4 | Epoxidur-polymer | -55 - +125 | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-16SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | 20 | — | — | 4 | Epoxidur-polymer | -55 - +125 | Sleva | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-1PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 6 | — | — | 3 | 4 | Epoxidový polyuretan | Provozní teplota | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-1SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 6 | — | — | 3 | 4 | Epoxidový polyuretan | -55 - +125 | Slečna | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-20PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 10 | 4 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-20SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 10 | 4 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Slečna | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-21PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | 37 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-21SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | 37 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Slečna | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-22PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | 3 | 3 | — | 4 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | 135 | 80 | 110 | Ethylakrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-22SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | 3 | 3 | — | 4 | Epoxidový polyuretan | -55 - +125 | Slečna | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | 135 | 80 | 110 | Ethylakrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-2PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 2 | 12 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-2SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 2 | 12 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Slečna | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-3PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | — | — | 3 | 4 | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 6.3 | 1250 | 1750 | MIL-DTL-5015 | — | — | 3500 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-3SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | — | — | 3 | 4 | Epoxid-polyuretan | Provozní teplota | Zárazka | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 6.3 | 1250 | 1750 | MIL-DTL-5015 | — | — | 3500 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-51PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 12 | — | — | — | 3 | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-51SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 12 | — | — | — | 3 | Epoxid-polyuretan | Provozní teplota | Zárazka | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-5PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 1 | 2 | 2 | — | 4 | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-5SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | 1 | 2 | 2 | — | 4 | Epoxid-polyuretan | Provozní teplota | Zárazka | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-6PN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | — | 3 | — | 4 | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-28-6SN-EAC | Černá | Hliníková slitina | min. 2.7 | — | — | — | 3 | — | 4 | Epoxid-polyuretan | Provozní teplota | Zárazka | Lakovaná | 28 | Nevodivá | max. 7.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 36.0 | 20.6 | 4.0 | 1 5/8"-18 UNEF 2A | 46.7 | 39.7 | 50.8 | 3.7 | 9.0 | IP69 | |
| GB210-32-013PN-EAC | Černá | Hliníková slitina | min. 3.6 | — | 13 | — | — | — | 4 | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 4.8 | 900 | 1250 | SEV-EN60998-1 | MIL-DTL-5015 | Všechny | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-32-013SN-EAC | Černá | Hliníková slitina | min. 3.6 | — | 13 | — | — | — | 4 | Epoxid-polyuretan | Provozní teplota | Zárazka | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 4.8 | 900 | 1250 | SEV-EN60998-1 | MIL-DTL-5015 | Všechny | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-32-15PN-EAC | Černá | Hliníková slitina | min. 3.6 | 2 | 6 | — | — | — | 4 | Epoxy-polyuretan | Provozní teplota | Kolík | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | 300 | 200 | 240 | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-32-15SN-EAC | Černá | Hliníková slitina | min. 3.6 | 2 | 6 | — | — | — | 4 | Epoxy-polyuretan | Provozní teplota | Zárazník | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | 200 | — | — | — | 245 | 150 | 200 | 300 | 240 | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-32-17PN-EAC | Černá | Hliníková slitina | min. 3.6 | — | — | — | 4 | — | 3 | Epoxy-polyuretan | Provozní teplota | Kolík | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-32-17SN-EAC | Černá | Hliníková slitina | min. 3.6 | — | — | — | 4 | — | 3 | Epoxy-polyuretan | Provozní teplota | Zárazník | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-32-1PN-EAC | Černá | Hliníková slitina | min. 3.6 | 2 | 3 | — | — | — | 4 | Epoxy-polyuretan | Provozní teplota | Kolík | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2800 | — | — | — | — | 300 | 200 | 240 | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-32-1SN-EAC | Černá | Hliníková slitina | min. 3.6 | 2 | 3 | — | — | — | 4 | Epoxy-polyuretan | Provozní teplota | Zárazník | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2800 | 200 | — | — | — | 245 | 150 | 200 | 300 | 240 | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-32-22PN-EAC | Černá | Hliníková slitina | min. 3.6 | — | — | 54 | — | — | 4 | Epoxy-polyuretan | Provozní teplota | Kolík | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-32-22SN-EAC | Černá | Hliníková slitina | min. 3.6 | — | — | 54 | — | — | 4 | Epoxy-polyuretan | Provozní teplota | Zárazník | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-32-31PN-EAC | Černá | Hliníková slitina | min. 3.6 | — | — | 31 | — | — | 4 | Epoxy-polyuretan | Provozní teplota | Kolík | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | SEV-EN60998-1 | MIL-DTL-5015 | Všechny | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-32-31SN-EAC | Černá | Hliníková slitina | min. 3.6 | — | — | 31 | — | — | 4 | Epoxy-polyuretan | Provozní teplota | Zárazník | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | SEV-EN60998-1 | MIL-DTL-5015 | Všechny | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-32-59PN-EAC | Černá | Hliníková slitina | min. 3.6 | — | — | 40 | — | 2 | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69K | |
| GB210-32-59SN-EAC | Černá | Hliníková slitina | min. 3.6 | — | — | 40 | — | 2 | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69K | |
| GB210-32-5PN-EAC | Černá | Hliníková slitina | min. 3.6 | 2 | — | — | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | 300 | 200 | 240 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69K | |
| GB210-32-5SN-EAC | Černá | Hliníková slitina | min. 3.6 | 2 | — | — | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | 200 | — | — | — | 245 | 150 | 200 | 300 | 240 | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69K | |
| GB210-32-8PN-EAC | Černá | Hliníková slitina | min. 3.6 | — | 6 | 24 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69K | |
| GB210-32-8SN-EAC | Černá | Hliníková slitina | min. 3.6 | — | 6 | 24 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69K | |
| GB210-32-A30PN-EAC | Černá | Hliníková slitina | min. 3.6 | — | 10 | 20 | — | — | — | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69K | |
| GB210-32-A30SN-EAC | Černá | Hliníková slitina | min. 3.6 | — | 10 | 20 | — | — | — | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69K | |
| GB210-32-A55PN-EAC | Černá | Hliníková slitina | min. 3.6 | — | — | 55 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69K | |
| GB210-32-A55SN-EAC | Černá | Hliníková slitina | min. 3.6 | — | — | 55 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69K | |
| GB210-32-A9PN-EAC | Černá | Hliníková slitina | min. 3.6 | — | — | 6 | 3 | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | 135 | 80 | 110 | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-32-A9SN-EAC | Černá | Hliníková slitina | min. 3.6 | — | — | 6 | 3 | — | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 32 | Nevodivá | max. 8.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | 135 | 80 | 110 | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 1 7/8"-16 UN 2A | 53.4 | 44.5 | 57 | 4.3 | 10.5 | IP69 | |
| GB210-36-10PN-EAC | Černá | Hliníková slitina | min. 4.5 | — | — | 48 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 36 | Nevodivá | max. 9.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 1/16"-16 UN 2A | 60 | 49.2 | 63.5 | 4.3 | 11.3 | IP69 | |
| GB210-36-10SN-EAC | Černá | Hliníková slitina | min. 4.5 | — | — | 48 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 36 | Nevodivá | max. 9.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 1/16"-16 UN 2A | 60 | 49.2 | 63.5 | 4.3 | 11.3 | IP69 | |
| GB210-36-15PN-EAC | Černá | Hliníková slitina | min. 4.5 | — | — | 35 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 36 | Nevodivá | max. 9.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 1/16"-16 UN 2A | 60 | 49.2 | 63.5 | 4.3 | 11.3 | IP69 | |
| GB210-36-15SN-EAC | Černá | Hliníková slitina | min. 4.5 | — | — | 35 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 36 | Nevodivá | max. 9.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | MIL-DTL-5015 | Zbytek | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 1/16"-16 UN 2A | 60 | 49.2 | 63.5 | 4.3 | 11.3 | IP69 | |
| GB210-36-3PN-EAC | Černá | Hliníková slitina | min. 4.5 | 3 | 3 | — | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 36 | Nevodivá | max. 9.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | 300 | 200 | 240 | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 1/16"-16 UN 2A | 60 | 49.2 | 63.5 | 4.3 | 11.3 | IP69 | |
| GB210-36-3SN-EAC | Černá | Hliníková slitina | min. 4.5 | 3 | 3 | — | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 36 | Nevodivá | max. 9.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | 200 | — | — | — | 245 | 150 | 200 | 300 | 240 | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 1/16"-16 UN 2A | 60 | 49.2 | 63.5 | 4.3 | 11.3 | IP69 | |
| GB210-36-5PN-EAC | Černá | Hliníková slitina | min. 4.5 | 4 | — | — | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 36 | Nevodivá | max. 9.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | 300 | 200 | 240 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 1/16"-16 UN 2A | 60 | 49.2 | 63.5 | 4.3 | 11.3 | IP69 | |
| GB210-36-5SN-EAC | Černá | Hliníková slitina | min. 4.5 | 4 | — | — | — | — | 2 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 36 | Nevodivá | max. 9.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | 200 | — | — | — | 245 | 150 | 200 | 300 | 240 | — | — | — | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 1/16"-16 UN 2A | 60 | 49.2 | 63.5 | 4.3 | 11.3 | IP69 | |
| GB210-36-7PN-EAC | Černá | Hliníková slitina | min. 4.5 | — | 7 | 40 | — | — | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Kolík | Lakovaná | 36 | Nevodivá | max. 9.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 1/16"-16 UN 2A | 60 | 49.2 | 63.5 | 4.3 | 11.3 | IP69 | |
| GB210-36-7SN-EAC | Černá | Hliníková slitina | min. 4.5 | — | 7 | 40 | — | — | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Zárazka | Lakovaná | 36 | Nevodivá | max. 9.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 1/16"-16 UN 2A | 60 | 49.2 | 63.5 | 4.3 | 11.3 | IP69 | |
| GB210-36-A22PN-EAC | Černá | Hliníková slitina | min. 4.5 | — | 22 | — | — | — | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Kolík | Lakovaná | 36 | Nevodivá | max. 9.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 1/16"-16 UN 2A | 60 | 49.2 | 63.5 | 4.3 | 11.3 | IP69 | |
| GB210-36-A22SN-EAC | Černá | Hliníková slitina | min. 4.5 | — | 22 | — | — | — | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Zárazka | Lakovaná | 36 | Nevodivá | max. 9.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 1/16"-16 UN 2A | 60 | 49.2 | 63.5 | 4.3 | 11.3 | IP69 | |
| GB210-40-31PN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 31 | — | — | — | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-31SN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 31 | — | — | — | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Zárazka | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-35PN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 35 | — | — | — | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 4.8 | 900 | 1250 | SEV-EN60998-1 | MIL-DTL-5015 | Všechny | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-35SN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 35 | — | — | — | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Zárazka | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 4.8 | 900 | 1250 | SEV-EN60998-1 | MIL-DTL-5015 | Všechny | 2800 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-56PN-EAC | Černá | Hliníková slitina | min. 5.9 | — | — | 85 | — | — | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-56SN-EAC | Černá | Hliníková slitina | min. 5.9 | — | — | 85 | — | — | 4 | Epoxiduritanová polyuretanová | -55 - +125 | Zárazka | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylakrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-63PN-EAC | Černá | Hliníková slitina | min. 5.9 | — | — | 61 | — | — | 4 | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | SEV-EN60998-1 | MIL-DTL-5015 | Všechny | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-63SN-EAC | Černá | Hliníková slitina | min. 5.9 | — | — | 61 | — | — | 4 | Epoxid-polyuretan | Provozní teplota | Zárazník | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | SEV-EN60998-1 | MIL-DTL-5015 | Všechny | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-9PN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 22 | 24 | — | 1 | 4 | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-9SN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 22 | 24 | — | 1 | 4 | Epoxid-polyuretan | Provozní teplota | Zárazník | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A10PN-EAC | Černá | Hliníková slitina | min. 5.9 | — | — | 4 | 4 | — | 4 | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A10SN-EAC | Černá | Hliníková slitina | min. 5.9 | — | — | 4 | 4 | — | 4 | Epoxid-polyuretan | Provozní teplota | Zárazník | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 4.8 | 900 | 1250 | MIL-DTL-5015 | — | — | 2800 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A14PN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 6 | — | 8 | — | 3 | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A14SN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 6 | — | 8 | — | 3 | Epoxid-polyuretan | Provozní teplota | Zárazník | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A20PN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 18 | — | — | 2 | 4 | Epoxid-polyuretan | Provozní teplota | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A20SN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 18 | — | — | 2 | 4 | Epoxid-polyuretan | Provozní teplota | Zárazník | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A25PN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 24 | — | 1 | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A25SN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 24 | — | 1 | — | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | 135 | 80 | 110 | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A47PN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 22 | 24 | — | 1 | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A47SN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 22 | 24 | — | 1 | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | 41 | 23 | 35 | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A4PN-EAC | Černá | Hliníková slitina | min. 5.9 | 4 | — | — | — | — | — | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 6.3 | 1250 | 1750 | ABB | MIL-DTL-5015 | Všechny | 3500 | — | — | — | — | 300 | 200 | 240 | — | — | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A4SN-EAC | Černá | Hliníková slitina | min. 5.9 | 4 | — | — | — | — | — | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 6.3 | 1250 | 1750 | ABB | MIL-DTL-5015 | Všechny | 3500 | 200 | — | — | — | 245 | 150 | 200 | 300 | 240 | — | — | — | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A60PN-EAC | Černá | Hliníková slitina | min. 5.9 | — | — | 60 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A60SN-EAC | Černá | Hliníková slitina | min. 5.9 | — | — | 60 | — | — | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A62PN-EAC | Černá | Hliníková slitina | min. 5.9 | — | — | 60 | — | 2 | 4 | Epoxid-polyuretan | -55 - +125 | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A62SN-EAC | Černá | Hliníková slitina | min. 5.9 | — | — | 60 | — | 2 | 4 | Epoxid-polyuretan | -55 - +125 | Zárazka | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | 56 | 90 | 72 | — | — | — | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A8PN-EAC | Černá | Hliníková slitina | min. 5.9 | 4 | — | 4 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 6.3 | 1250 | 1750 | MIL-DTL-5015 | — | — | 3500 | — | — | — | — | 300 | 200 | 240 | — | — | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-A8SN-EAC | Černá | Hliníková slitina | min. 5.9 | 4 | — | 4 | — | — | 4 | Epoxidový polyuretan | -55 - +125 | Zárazník | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 6.3 | 1250 | 1750 | MIL-DTL-5015 | — | — | 3500 | 200 | — | — | — | 245 | 150 | 200 | 300 | 240 | — | — | — | 22 | 13 | 20 | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-B37PN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 37 | — | — | — | 2 | Epoxidový polyuretan | -55 - +125 | Kolík | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 | |
| GB210-40-B37SN-EAC | Černá | Hliníková slitina | min. 5.9 | — | 37 | — | — | — | 2 | Epoxidový polyuretan | -55 - +125 | Zárazník | Lakovaná | 40 | Nevodivá | max. 10.0 | ≥ 3.2 | 500 | 700 | MIL-DTL-5015 | — | — | 2000 | — | — | — | — | — | — | — | — | — | 41 | 23 | 35 | — | — | — | — | — | — | — | — | — | Ethylen-akrylát GXF | 37.5 | 22.2 | 4.0 | 2 5/16"-16 UN 2A | 66 | 55.6 | 69.8 | 4.3 | 11.3 | IP69 |
Máte zájem o více produktů?
Přidejte produkty do poptávkového košíku a odešlete jednu společnou poptávku našemu týmu.
Zpět do kataloguPotřebujete ověřit kompatibilitu, vyžádat si 3D modely nebo technickou dokumentaci? Napište nám a náš tým techniků se vám obratem ozve.
Od výběru komponentů po ucelený technologický celek
